Fiber optic cable suspension clamp 2 Groove 3 Hole, 3 bolts consisting of 2 steel plates that are galvanized, electrolyzed or hot-dipped, in the groove there are friction veins to hold the wire. The material is used steel or aluminum with 2 square neck bolts to prevent rotation.

Separate and peel off the sheath along the fiber optic cable to divide the fiber optic cable and the load-bearing reinforcement wire before clamping the wire to the cable clip.

Cable clamps can be mounted on the pole in the following ways:

1. Use bolts to pierce centrifugal poles, power poles, square round poles.

Use a bolt through the middle hole of the cable clip and fasten it across the pole

2. Use stainless steel straps and stainless steel belt buckles: Usually use A10, A20 to support straight running wires

Used for square columns or round columns, with no holes through the center of the column.

Use 1 U-spacer, string the stainless steel strap and tighten the belt lock on the pole, then install the fiber optic cable clip on the U-shaped pad with bolts